Clear RTV Silicone Adhesive/Sealant 8 oz. (227g) Automatic Can

CLEAR SILICONE ADHESIVE/SEALANT PART NO. 49204

TYPICAL PROPERTIES

Type .....................One-Part Silicone Rubber

Physical Form..................Non-slumping Paste

Cure.......Cures at Room Temperature on Exposure to Water vapor in the air, giving off a small amount of acetic acid

Special Properties.......Meets or exceeds OEM volatility Specifications. wont foul engine sensors

Primary Uses...General purpose sealing and bonding as a Space-filling rubber adhesive As Supplied Specific Gravity @ 25 degrees C (77 degrees F).................1.02

Extrusion Rate (3.18 mm orifice, 90 psi air pressure), g/min.......400

Flow Rate (sag or slump on 3.18 x 101.6-mm bead), mm ......Nil

Tack-Free Time @ 25 degrees C (77 degrees F) & 50% RH, minutes.....................10 to 20 Cure Time @ 25 degrees C (77 degrees F) & 50% RH (3.18-mm thickness), hours ........... 24 As Cured Physical

ASTM D2240 Durometer Hardness, Shore A, points............. 20

ASTM D412 Die C Tensile Strength, Mpa (psi).. 2.4 (350)

ASTM D412 Die C Elongation, percent ............600 ASTM D746 Brittle Point, degrees degrees C( degrees F).-73(-100) FEATURES Bonds and seals Waterproof and weatherproof seal Insulates thermally and electrically Permanently flexible

BONDS AND SEALS: Auto and appliance trim, including metal, fabric and fabric backed plastics Glass, vinyl, wood and rubber Trailers, truck cabs Frayed wires